Hunter 28419 52 St. Michaels Manuel d'utilisateur télécharger pdf (Page 17)

42208-01 • 10/24/11 • Hunter Fan Company

Problem: Nothing happens; fan does not move

1. Turn power on, replace fuse, or reset breaker.

2. Loosen canopy, check all connections according to the wiring the fan section.

3. Check the plug connection in the switch housing.

4. Push motor reversing switch rmly left or right to ensure that the switch is engaged.

5. Pull the pull chain to ensure it is on.

6. Remove the shipping bumpers.

Problem: Noisy operation

1. Tighten the blade assembly screws and blade iron armature screws until snug.

2. Check to see if the blade is cracked. If so, replace all the blades.

Problem: Excessive wobbling

1. Make sure the blades are securely attached to the blade irons according to the blade assembly instructions

provided.

2. After thoroughly verifying the blades are securely attached to the blade irons, follow the instructions in the

enclosed balancing kit to balance the fan.

Problem: Lights shut oﬀ suddenly, but fan is still operating

1. Check to make sure the wattage and type of the light bulbs that are installed meet the specications on the

light socket.

2. Turn the power to the fan o at the wall switch. Wait 5 minutes, then resume power to the fan.

Problem: CFL bulbs ﬂicker when controlled by a dimming remote or wall control

1. CFL light bulbs are not usually made for dimming. Replace the CFL bulbs with dimmable light bulbs, or install

the fan in a location without a dimming control.

If you need parts or service assistance, please call

888-830-1326 (In Canada, call 866-268-1936) or

visit us at our website at

http://www.hunterfan.com.

Hunter Fan Company

7130 Goodlett Farms Parkway #400

Memphis, Tennessee 38016

9 • Troubleshooting

1 2 ... 12 13 14 15 16 17

Pas de commentaire

Hunter 28419 52 St. Michaels Manuel d'utilisateur Page 17